Standoffs, Spacers, Captive, Swage, Male/ Female, Handles, Thumb Screws, Shoulder Screws, Insulating Washers, Male/Male Standoffs, Cable Ties, Plastic Circuit Board Supports, Plastic Handles and Electronic Hardware. Electronic Hardware, Electronic Hardware, Handles, Standoffs and Spacers, Self Clinching Fasteners

     Home      Search      Order      Quote      Cross      Catalog      Reps      Technical      Terms      Distributors      About Us      Contact Us

 

Technical / Engineering Info

 
    Product Overview
 
    Standard e-Catalog
    Metric e-Catalog    
 

Self Clinching Fasteners Technical / Engineering Info

    Self Clinching
    Fastener e-Catalog



STANDOFFS- Threaded:  STANDARD SIZES
See Technical / Engineering Data
DIAMETER: 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8"/ 1/2" / 5/8" / 3/4"
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, 303 Stainless Steel, 316 Stainless Steel, Carbon Steel, Natural Nylon, Black Nylon, Titanium, Teflon®, Linen Base Phenolic, Lexan®, Delrin®, Ultem®
LENGTH: Wide variety of lengths in 1/64" (.015) increments- up to 10"
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD: 0-80 through 1/2- 20  /  Internal- Class UNC 2B.  Thread Locking Products available.
TOLERANCE: Length: Up to 4" ± .005 / From 4" to 6" ± .008 / Over 6" ± .010.
Diameter: Standard Commercial Bar Stock Tolerance.

STANDOFFS- Threaded: METRIC SIZES
See Technical / Engineering Data
DIAMETER: 3mm / 4mm / 4.5mm / 5mm / 6mm / 8mm / 10mm / 13mm / 16mm / 19mm
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Phenolic, Lexan®, Delrin®, Ultem®
LENGTH: Wide variety of lengths in .5mm (.019) increments- up to 254mm.
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD: M1.6 through M14 /  Internal- Class 6H.  Thread Locking Products available.
TOLERANCE: Length: Up to 100mm ± .13mm /  From 101mm to 150mm ± .20mm / Over 150mm ± .25mm.
Diameter: Standard Commercial Bar Stock Tolerance.




SPACERS- Unthreaded Standoffs: STANDARD SIZES
See Technical / Engineering Data
DIAMETER: 1/16" / 3/32" / 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2" / 5/8" / 3/4" / 1" / 1-1/4" / 1-1/2" / 1-3/4" / 2"
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, 303 Stainless Steel, 316 Stainless Steel, Carbon Steel, Natural Nylon, Black Nylon, Titanium, Teflon®, Linen Base Phenolic, Lexan®, Delrin®, Ultem®
LENGTH: Wide variety of lengths in 1/64" (.015) increments- up to 2"
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
INSIDE HOLE DIAMETER: Ranging from .024  through 1.005 + .010 / - .000 for screw sizes 0-80 through 1/2- 20.
TOLERANCE: Length: Up to 2" ± .005 /  Inside Hole Diameter:  + .010 / - .000.
Diameter: Standard Commercial Bar Stock Tolerance.



SPACERS- Unthreaded Standoffs: METRIC SIZES
See Technical / Engineering Data
DIAMETER: 3mm / 4mm / 4.5mm / 5mm / 6mm / 8mm / 10mm / 13mm / 16mm / 19mm
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Phenolic, Lexan®, Delrin®, Ultem®
LENGTH: Wide variety of lengths in .5mm (.019) increments- up to  51mm
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
INSIDE HOLE DIAMETER: Ranging from 1.7mm  through 15.5mm + .27 / - .000 for screw sizes M1.6 through M14.
TOLERANCE: Length: Up to 51mm ± .13mm /  Inside Hole Diameter:  + .27 / - .000.
Diameter: Standard commercial bar stock tolerances.




SWAGE STANDOFFS & SPACERS: STANDARD SIZES
See Technical / Engineering Data
DIAMETER: 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8"
SHAPE:  Round, Hex
MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
BODY LENGTH:  Wide variety of lengths- 1/32" (.031) increments up to 1".
SHANK LENGTH:  Wide variety of lengths ranging from .062 through .295.
FINISH:  Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD:  0-80 through 10-32 / Internal Thread- Class UNC 2B.
INSIDE HOLE DIAMETER:  Ranging from .063 through .194 for screw sizes 0-80 through 10-32.
TOLERANCE:  Body Length:  ± .005 /  Shank Length:  ± .003
Inside Hole Diameter:  + .000 - .003.
SWAGING TOOLS:  Punch & Anvil available
Diameter: Standard commercial bar stock tolerances.



SWAGE STANDOFFS & SPACERS: METRIC SIZES 
See Technical / Engineering Data
DIAMETER:  3mm / 4mm / 4.5mm / 5mm / 6mm / 8mm / 10mm
SHAPE:  Round, Hex
MATERIAL:  Brass, Aluminum, Stainless Steel, Carbon Steel
BODY LENGTH:  Wide variety of lengths in .5mm increments- up to 51mm.
SHANK LENGTH:  Wide variety of lengths ranging from 1.9 through 7.4
FINISH:  Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD:  M1.6 / M2.5 / M3 / M3.5 / M4 / M5 - Internal Thread- Class 6H.
INSIDE HOLE DIAMETER:  Ranging from 1.8  through 5.3 for screw sizes M1.6 through M5.
TOLERANCE:  Body Length:  ± .13 /  Shank Length:  ± .08 /  Inside Hole
Diameter: + .00 - .08.  
SWAGING TOOLS: Punch & Anvil available
Diameter: Standard commercial bar stock tolerances.





MALE-FEMALE STANDOFFS: STANDARD SIZES
See Technical / Engineering Data
DIAMETER: 1/8" / 5/32" / 3/16" / 1/4" / 5/16" / 3/8" / 1/2"
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, 303 Stainless Steel, 316 Stainless Steel, Titanium, Carbon Steel, Natural Nylon, Black Nylon & Delrin®
LENGTH: Wide variety of lengths in 1/32" (.031) increments- up to 9"
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize -Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD: 0-80 through 1/2- 20 / Thread Locking Products available.
Internal Thread- Class UNC 2B /  External Thread- Class UNC 2A. Internal thread depth will be adjusted where body dimensions will not permit full thread depth.
TOLERANCE: Length: Up to 4" ± .005 / From 4" to 6" ± .008 / Over 6" ± .010.
No Undercut on Nylon or Delrin®
Diameter: Standard commercial bar stock tolerances.


MALE-FEMALE STANDOFFS: METRIC SIZES
See Technical / Engineering Data
DIAMETER: 3mm / 4mm / 4.5mm / 5mm / 6mm / 8mm / 10mm / 13mm
SHAPE: Round, Square and Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon & Delrin®
LENGTH: Wide variety of lengths in .5mm increments- up to 200mm
FINISH: Available in: Anodize (Sulphuric) Dichromate Seal, Yellow-Green / Anodize (Sulphuric) Hot Water Seal, Clear / Anodize (Chromic) Hot Water Seal, Dark Gray  / Anodize- Black / Anodize-Black High Lustre / Cadmium Plate, Clear Chromate / Cadmium Plate, Commercial / Cadmium Plate, Gold Chromate / Nickel Plate / Chromium Plate (Bright) / Chromium Plate, Engineering / Chromium Plate Over Nickel Plate / Passivate / Bright Dip / Iridite-Clear / Iridite-Gold #14 / Alodine 1200 / Black Oxide-Brass / Black Oxide- Stainless Steel / Hot Tin Dip / Silver Plate / Electro Tin / Electro Tin 60/40 Solder / Zinc Plate .0002 Thick-Clear Chromate / Zinc Plate .0002 Thick, Yellow-Green Chromate / Zinc Plate .0002 Thick, Black Chromate / Alkali Caustic Etch.
THREAD: M1.6 through M10 / Thread Locking Products available.
Internal Thread- Class 6H /  External Thread- Class 6G. Internal thread depth will be adjusted where body dimensions will not permit full thread depth.
TOLERANCE: Length: Up to 100mm ± .15mm /  From 101mm to 150mm ± .20mm / Over 150mm ± .25mm.
No Undercut on Nylon or Delrin®
Diameter: Standard commercial bar stock tolerances.




JACK SCREWS STANDOFFS:  STANDARD SIZES
See Technical / Engineering Data
DIAMETER: 3/16"
SHAPE: Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel.
BODY LENGTH: 3/16"(.187)
EXTERNAL THREAD LENGTH: Ranging from .187 through .750 
Thread Locking Products available.
FINISH: Same as above/ Male to Female Standoffs
THREAD: 4-40 Internal Thread- Class UNC 2B /  4-40 External Thread- Class UNC 2A. 
Thread Locking Products available.
TOLERANCE: Body Length:  ±  .005 /  External Thread Length ± .015     
Diameter: Standard commercial bar stock tolerances.
All Jackscrews are shipped unassembled with 2-  #4 flat washers,  1- #4 lock washer
and 1- 4- 40 nut.


JACK SCREWS STANDOFFS:  METRIC SIZES
See Technical / Engineering Data
DIAMETER: 4.5mm & 5mm
SHAPE: Hex
MATERIAL: Brass, Aluminum, Stainless Steel, Carbon Steel.
BODY LENGTH: 5mm
EXTERNAL THREAD LENGTH: Ranging from 5mm through 19mm
Thread Locking Products available.
FINISH: Same as above/ Metric Male to Female Standoffs
THREAD: M3 x 0.5 Internal Thread- Class 6H /  M3 x 0.5 External Thread
- Class 6G. Thread Locking Products available.
TOLERANCE: Body Length:  ± .15mm /  External Thread Length ± .25mm.
Diameter: Standard Commercial Bar Stock Tolerances. All Jackscrews are shipped unassembled
with  2- M3 flat washers,  1- M3 lock washer and 1- M.3 x 0.5 nut.




These Product are Continued On Next Page:
• Male-Male Standoffs
• Captive Panel Hardware
• Insulating Washers
• Thumb Screws
• Thumb Nuts
• Handles & Ferrules
• Shoulder Screws
• Cable Ties  /  • Mounting Bases  /  • Installation Tools /  • Flexible Tubing

Technical Info for Dowel Pins
• Dowel Pins

 
    NAS / MS e-Catalog
 
    973-674-1700

    1-800-526-1389

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     
   

SIC Code# 3429      NAICS Code# 332510     FSCM (Cage) 04729 (Federal Supply Code#)

 
   

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803

 


RoHS Compliance Statement   I   R.E.A.C.H. Statement   I   DFARS   I   WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

 
 
   
 


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement

 
 
 
 
 
 
 
   
 Electronic Hardware, STANDOFFS, Male Female Standoffs, Spacer Standoffs, Male Male Standoffs, Swage Standoffs, Jack Screws, Handles, Captive Panel Screws, Retainers, Thumb Screws, Shoulder Screws, Insulating Washers, Cable Ties.