973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

   Home    Search    Order    Quote    Cross    Catalog    Reps    Technical    Terms    Distributors    About Us    Contact Us

Male- Female Standoffs
Technical / Engineering Data
Male-Female Standoffs      Standard e-Catalog
Material / Shape Selection

  MATERIALS

Choose & write down your
material / shape code.
Go to next step
SPECIFICATIONS
ROUND SQUARE HEX

  Brass

M01 M02 M03 QQ-B- 626
Comp. 22, 1/2 Hard

  Aluminum

M04 M05 M06 QQ-A- 225a
Comp. 2, T-3

  Stainless Steel

M07 M08 M09 ASTM-A581, ASTM-A582,
QQ-S- 763, Class 303,
Cond. A

  Carbon Steel

M10 M11 M12 QQ-S- 633, Class 2

  Nylon

M17 M19 MIL-P- 17091B,
Grade 101

  Delrin®

M23 M25 LP392-A


    RoHS Compliance Statement  I  R.E.A.C.H. Statement  I  DFARS  I  WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes

 

Properties for Non- Metallic Materials

Properties

Phenolic
Linen Based
Teflon® Nylon LexanŽ
10%
Glass Filled

Delrin®

Ultem®

 Flammability Rating V-1 UL HB UL 94V-2 V-O UL94HB V-O
 Water Absorption (%) 24 hrs. 0.6 - 0.7 .02 1.5 0.15 0.25 0.25
 Dielectric Constant (60 cycles) 5.2 - 5.3 2.1 10 2.9 3.7 3.15
 Dielectric Strength 1/8 thickness (v/mil) 350 400 300- 400 380 500 N/A
 Arc Resistance (sec) 100 200 140 10 129 120
 Tensile Strength (psi) 6,500- 7,000 2,700- 3,100 11,200-16,500 9,000 10,400 16,500
 Heat Resistance  
 (continuous degrees F)
250-275 550 250 270 250 340
 Compression Strength (psi) 201-235 700-1,200 4,000 -11,000 12,500 18,000 22,000

 

Plating Selection
Plating Available On These Materials:
Brass,  Aluminum, Stainless Steel & Carbon Steel
AVAILABLE PLATING Choose & write down your
plating code.
Go to next step
PLATING AVAILABLE
ON THIS MATERIAL
APPLICABLE
SPECIFICATIONS

 Anodize (Sulphuric)
 Dichromate Seal, Yellow/ Green

F01 Aluminum Mil-A- 8625F, Type 2

 Anodize (Sulphuric) Hot Water Seal,
 Clear   

F02 Aluminum Mil-A- 8625F, Type 2,
Class 1

 Anodize (Chromic) Hot Water Seal,
 Dark Gray

F03 Aluminum Mil-A- 8625F, Type 1

 Anodize- Black

F04 Aluminum Mil-A- 8625F- Black,
Type 2, Class 2
 Anodize- Black High Lustre F04a Aluminum Mil-A- 8625F- Black High
Lustre, Type 2, Class 2

 Cadmium Plate, Clear Chromate

F05 Brass, Carbon Steel QQ-P- 416, Type 2, Class 2

 Cadmium Plate, Commercial

F05a Brass, Carbon Steel

 Cadmium Plate, Gold Chromate

F06 Brass, Carbon Steel QQ-P- 416,
Class 2, Type 2

 Nickel Plate

F07 Brass, Carbon Steel QQ-N- 290A,
Class 1, Grade F

 Chromium Plate (Bright)

F08 Brass, Carbon Steel QQ-C- 320B,
Class 1, Type 1

 Chromium Plate, Engineering

F08a Brass, Carbon Steel QQ-C- 320B,
Class 1, Type 2

 Chromium Plate Over Nickel Plate

F08c Brass, Carbon Steel Mil-QQ-C- 320,
Over-Mil-QQ-N- 290

 Passivate

F09 Stainless Steel Mil-F- 14072E (EL)
E 300

 Bright Dip

F11 Aluminum, Brass

 Iridite, Clear

F12 Aluminum Mil-C- 5541E
Mil-DTL- 5541F

 Iridite, Gold #14

F13 Aluminum Mil-C- 5541E
Mil-DTL- 5541F

 Alodine 1200

F13a Aluminum

 Black Oxide, Brass

F14 Brass Mil-F- 495C

 Black Oxide, Stainless Steel

F15 Stainless Steel Mil-C- 13924A, Class 3

 No Finish
 *even if there is no finish- this code
  must be included in part #

F16 Brass, Aluminum,
Stainless Steel, Carbon Steel
& All Plastics

 Hot Tin Dip

F17a Brass, Carbon Steel Mil-T- 10727, Type 2

 Silver Plate

F18 Brass, Carbon Steel QQ-S-365- 0.0002- 0.0003

 Electro Tin

F19 Brass, Carbon Steel Mil-T- 10727, Type 1

 Electro Tin 60/40 Solder

F19a Brass, Carbon Steel M222-Mil-F- 14072

 Zinc Plate .0002 Thick,
 Clear Chromate

F21 Brass, Carbon Steel ASTM-B- 633, Type 1

 Zinc Plate .0002 Thick,
 Yellow /Green Chromate          

F21a Brass, Carbon Steel ASTM-B- 633, Type 2,
(Color Chromate)
 Zinc Plate .0002 Thick,
 Black Chromate
F21b Brass, Carbon Steel ASTM-B- 633,Type 2,
(Color Chromate)

 Alkali Caustic Etch

F26 Aluminum

 

Thread Specifications
THREAD SIZE Choose & write down your
thread number.
Go to next step
A
EXTERNAL
FULL THREAD
C INTERNAL
FULL THREAD DEPTH
D
STANDARD
DIAMETERS
0- 80 080 5/32 3/16 1/8-5/32
1- 64 164 5/32 3/16 1/8-5/32
1- 72 172 5/32 3/16 1/8-5/32
2- 56 256 5/32 3/16 5/32- 3/16-1/4
2- 64 264 5/32 3/16 5/32- 3/16-1/4
3- 48 348 3/16 1/4 3/16-1/4
3- 56 356 3/16 1/4 3/16-1/4
4- 40 440 3/16 1/4 3/16-1/4-5/16
4- 48 448 3/16 1/4 3/16-1/4-5/16
5- 40 540 1/4 3/8 3/16-1/4-5/16
5- 44 544 1/4 3/8 3/16-1/4-5/16
6- 32 632 1/4 3/8 3/16-1/4-5/16-3/8
6- 40 640 1/4 3/8 3/16-1/4-5/16-3/8
8- 32 832 3/8 7/16 1/4-5/16-3/8
8- 36 836 3/8 7/16 1/4-5/16-3/8
10- 24 1024 3/8 1/2 1/4-5/16-3/8
10- 32 1032 3/8 1/2 1/4-5/16-3/8
12- 24 1224 1/2 9/16 5/16-3/8
1/4- 20 1420 1/2 9/16 3/8-1/2
1/4- 28 1428 1/2 9/16 3/8-1/2
5/16- 18 51618 9/16 9/16 1/2
5/16- 24 51624 9/16 9/16 1/2
3/8- 16 3816 5/8 5/8 1/2
3/8- 24 3824 5/8 5/8 1/2

 

Internal Thread Depth- Blind Holes
Contact our sales department for internal
thread depth when the body length
is smaller than the standard internal thread depth
THREAD SIZE STANDARD THREAD DEPTH BODY LENGTH *TAP DEPTH RANGE
0- 80 3/16 .125 / .218 .060 / .125
1- 64 3/16 .125 / .218 .060 / .125
1- 72 3/16 .125 / .218 .060 / .125
2- 56 3/16 .125 / .218 .060 / .125
2- 64 3/16 .125 / .218 .060 / .125
3- 48 1/4 .125 / .343 .060 / .281
3- 56 1/4 .125 / .343 .060 / .281
4- 40 1/4 .125 / .343 .060 / .281
4- 48 1/4 .125 / .343 .060 / .281
5- 40 3/8 .125 / .437 .060 / .378
5- 44 3/8 .125 / .437 .060 / .378
6- 32 3/8 .125 / .437 .060 / .378
6- 40 3/8 .125 / .437 .060 / .378
8- 32 7/16 .187 / .500 .125 / .437
8- 36 7/16 .187 / .500 .125 / .437
10- 24 1/2 .187 / .562 .125 / .500
10- 32 1/2 .187 / .562 .125 / .500
12- 24 1/2 .187 / .562 .125 / .500
1/4- 20 9/16 .250 / .625 .187 / .562
1/4- 28 9/16 .250 / .625 .187 / .562
5/16- 18 9/16 .250 / .625 .187 / .562
5/16- 24 9/16 .250 / .625 .187 / .562
3/8- 16 5/8 .500 / .687 .437 / .625
3/8- 24 5/8 .500 / .687 .437 / .625

 

Thread Locking Products Codes
Choose & write down your
OPTIONAL thread locking code.
Go back to
  THREAD LOCKING PRODUCTS
PH   NDŽ PATCH
RP   NDŽ  360° RING-PATCH
PL   NDŽ PELL-IT
MS   NDŽ MICROSPHERES
VT   NDŽ VIBRA-TITE
ST   NDŽ STRIP-THREAD

More Info on NDŽ Thread Locking Products

If external and internal threads are different,
please specify as follows: 1421- M04- F02- 632 I- 832 E
I = internal thread,  E = external thread.
TOLERANCES:
                    B-  Length up to 4" ± .005  /  4" to 6" ± .008  /  over 6" ± .010
 C-  Length will be adjusted where B dimensions
will not permit full thread depth
         Diameter: Standard commercial bar stock tolerances.
*No undercut Nylon & Delrin® For Modified Parts or Engineering Assistance:
Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
CopyrightŠ2017, Unicorp Inc., unicorpinc.com or its affiliates