973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

   Home    Search    Order    Quote    Cross    Catalog    Reps    Technical    Terms    Distributors    About Us    Contact Us

Metric Spacers
Technical / Engineering Data
 
Metric Spacers       Metric e-Catalog

Material / Shape Selection

  MATERIALS

Choose & write down your
material / shape code.
Go to next step

SPECIFICATIONS

ROUND

SQUARE

HEX

  Brass

M01 M02 M03 QQ-B- 626 Comp. 22, 1/2 Hard

  Aluminum

M04 M05 M06 QQ-A- 225a, Comp. 2, T-3

  Stainless Steel

M07 M08 M09 ASTM-A-581, ASTM-A-582,
QQ-S- 763, Class 303,
Cond. A

  Carbon Steel

M10 M11 M12 QQ-S- 633, Class 2

  Phenolic

M13 MIL- I- 24768 / 15

  Teflon®

M14 MIL- P- 14078

  Nylon

M17 M18 M19 MIL- P- 17091B, Grade 101

  Lexan®

M20 MIL- P- 81390

  Delrin®

M23 M25 LP- 392 A

  Ultem®

M26     GE 1000 Resins


    RoHS Compliance Statement  I  R.E.A.C.H. Statement  I  DFARS  I  WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes

 
Properties for Non- Metallic Materials

Properties

Phenolic Teflon® Nylon Lexan®

Delrin®

Ultem®

 Flammability Rating V-1 UL HB UL 94V-2 V-O UL94HB V-O
 Water Absorption (%) 24 hrs. 0.6 - 0.7 .02 1.5 0.15 0.25 0.25
 Dielectric Constant (60 cycles) 5.2 - 5.3 2.1 10 2.9 3.7 3.15
 Dielectric Strength 1/8 thickness
 (v/mil)
350 400 300- 400 380 500 N/A
 Arc Resistance (sec) 100 200 140 10 129 120
 Tensile Strength (psi) 6,500- 7,000 2,700- 3,100 11,200- 16,500 9,000 10,400 16,500
 Heat Resistance
 (continuous degrees F)
250- 275 550 250 270 250 340
 Compression Strength (psi) 201- 235 700- 1,200 4,000 - 11,000 12,500 18,000 22,000
 
Plating Selection
Plating Available On These Materials:
Brass,  Aluminum, Stainless Steel & Carbon Steel
AVAILABLE PLATING

Choose & write down your
plating code.
Go to next step

PLATING AVAILABLE ON THIS MATERIAL

APPLICABLE
SPECIFICATIONS

 Anodize (Sulphuric) Dichromate Seal,
 Yellow/Green
F01 Aluminum Mil-A- 8625F, Type 2
 Anodize (Sulphuric) Hot Water Seal, Clear F02 Aluminum Mil-A- 8625F, Type 2
Class 1
 Anodize (Chromic) Hot Water Seal,
 Dark Gray
F03 Aluminum Mil-A- 8625F, Type 1
 Anodize- Black F04 Aluminum Mil-A- 8625F- Black
Type 2, Class 2
 Anodize- Black High Lustre F04a Aluminum Mil-A- 8625F-
Black- High Lustre
Type 2, Class 2
 Cadmium Plate, Clear Chromate F05 Brass,
Carbon Steel
QQ-P- 416, Class 2,
Type 2
 Cadmium Plate, Commercial F05a Brass,
Carbon Steel
 Cadmium Plate, Gold Chromate F06 Brass,
Carbon Steel
QQ-P- 416, Class 2,
Type 2
 Nickel Plate F07 Brass,
Carbon Steel
QQ-N- 290A, Class 1,
Grade F
 Chromium Plate (Bright) F08 Brass,
Carbon Steel
QQ-C- 320B, Class 1,
Type 1
 Chromium Plate, Engineering F08a Brass,
Carbon Steel
QQ-C- 320B, Class 1,
Type 2
 Chromium Plate Over Nickel Plate F08c Brass,
Carbon Steel
Mil-QQ-C- 320,
Over-Mil-QQ-N-290
 Passivate F09 Stainless Steel Mil-F- 14072E
(EL) E 300
 Bright Dip F11

Brass, Aluminum

 Iridite, Clear F12 Aluminum Mil-C- 5541E
Mil-DTL- 5541F
 Iridite, Gold #14 F13 Aluminum Mil-C- 5541E
Mil-DTL- 5541F
 Alodine 1200 F13a Aluminum  
 Black Oxide, Brass F14

Brass

Mil-F- 495C
 Black Oxide, Stainless Steel F15 Stainless Steel Mil-C- 13924A, Class 3
 No Finish
 *even if there is no finish- this
  code must be included in part #
F16

Brass, Aluminum,
Stainless Steel, Carbon Steel &
All Plastics

 Hot Tin Dip F17a Brass,
Carbon Steel
Mil-T- 10727, Type 2
 Silver Plate F18 Brass,
Carbon Steel
QQ-S- 365 0.0002
- 0.0003
 Electro Tin F19 Brass,
Carbon Steel
Mil-T- 10727, Type1
 Electro Tin 60/40 Solder F19a Brass,
Carbon Steel
M222-Mil-F- 14072
 Zinc Plate .0002 Thick, Clear Chromate F21 Brass,
Carbon Steel
ASTM-B- 633, Type 1
 Zinc Plate .0002 Thick, Yellow/Green
 Chromate
F21a Brass,
Carbon Steel
ASTM-B- 633, Type 2,
(Color Chromate)
 Zinc Plate .0002 Thick, Black Chromate F21b Brass,
Carbon Steel
ASTM-B- 633, Type 2,
(Color Chromate)
 Alkali Caustic Etch F26 Aluminum

Thread / Inside Hole Diameter
Choose & write down your
thread / inside hole code.
Go back to
INSIDE HOLE DIAMETER (SPACERS) DRILL SIZE
(I.D.)
THREAD MAJOR
THREAD
DIAMETER
A 1.7 - 2.1 1.9 M1.6  x  0.35 1.6
B 2.2 - 2.6 2.3 M2.0  x  0.4 2.0
C 2.7 - 3.1 2.9 M2.5  x  0.45 2.5
D 3.2 - 3.6 3.4 M3.0  x  0.5 3.0
E 3.5 - 4.2 3.8 M3.5  x  0.6 3.5
F 4.2 - 4.8 4.6 M4.0  x  0.7 4.0
G 5.3 - 6.0 5.6 M5.0  x  0.8 5.0
H 6.3 - 7.0 6.7 M6.0  x  1.0 6.0
I 8.4 - 10.0 9.2 M8.0  x  1.25 8.0
J 10.0 - 12.0 11.0 M10.0  x  1.5 10.0
K 12.0 - 14.0 13 M12.0  x  1.75 12.0
L 13.5 - 15.5 14.5 M14.0  x  2.0 14.0
For Modified Parts or Engineering Assistance:
Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
Copyright©2017, Unicorp Inc., unicorpinc.com or its affiliates