973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

   Home    Search    Order    Quote    Cross    Catalog    Reps    Technical    Terms    Distributors    About Us    Contact Us

Metric Swage Standoffs
& Swage Spacers
Technical / Engineering Data
Metric Swage Standoffs & Swage Spacers      Metric e-Catalog


Material / Shape Selection
  MATERIALS Choose & write down your
material / shape code.
Go to next step
SPECIFICATIONS
ROUND HEX
  Brass 1 3 QQ-B- 626 Comp.,
22 1/2 Hard

  Aluminum

4 6 QQ-A- 225a Comp2, T-3

  Stainless Steel

7 9 ASTM-A-581, ASTM-A-582,
QQ-S- 763, Class 303,
Cond. A

  Carbon Steel

10 12 QQ-S- 633, Class 2


    RoHS Compliance Statement  I  R.E.A.C.H. Statement  I  DFARS  I  WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

 
Shank Length Selection
Chart lists the available shank lengths by Code letter, recommended type standoff
and recommended board thickness.

Choose & write down your shank code.
Go to next step

SHANK LENGTH BOARD THICKNESS

A

1.9 .8

B

2.7 1.6

C

3.4 2.4

D

4.2 3.2

E

5.8 4.8

F

7.4 6.4
 
Plating Selection
Plating Available On These Materials:
Brass,  Aluminum, Stainless Steel & Carbon Steel
AVAILABLE PLATING Choose & write down your plating number.
Go back to
PLATING AVAILABLE
ON THIS MATERIAL
APPLICABLE
SPECIFICATIONS

 Anodize (Sulphuric)Dichromate Seal,
 Yellow/Green

1 Aluminum Mil-A- 8625F, Type 2

 Anodize (Sulphuric) Hot Water Seal, Clear

2 Aluminum Mil-A- 8625F, Type 2,
Class 1

 Anodize (Chromic) Hot Water Seal, Dark Gray

3 Aluminum Mil-A- 8625F, Type 1

 Anodize- Black

4 Aluminum Mil-A- 8625F-Black
Type 2, Class 2

 Anodize- Black High Lustre

4a Aluminum Mil-A- 8625F- Black-
High Lustre, Type 2, Class 2

 Cadmium Plate, Clear Chromate

5 Brass,
Carbon Steel
QQ-P- 416, Class 2, Type 2

 Cadmium Plate, Commercial

5a Brass,
Carbon Steel

 Cadmium Plate, Gold Chromate

6 Brass,
Carbon Steel
QQ-P- 416, Class 2, Type 2

 Cadmium Plate, Olive Drab

6a Brass,
Carbon Steel
QQ-P- 416, Type 2,
Class 3

 Nickel Plate

7 Brass,
Carbon Steel
QQ-N- 290A, Class 1, Grade F

 Chromium Plate (Bright)

8 Brass,
Carbon Steel
QQ-C- 320B, Class 1, Type 1

 Chromium Plate, Engineering

8a Brass,
Carbon Steel
QQ-C- 320B, Class 1, Type 2

 Chromium Plate Over Nickel Plate

8c Brass,
Carbon Steel
Mil-QQ-C- 320,
Over-Mil-QQ- N- 290

 Passivate

9 Stainless Steel Mil-F-14072E (EL) E 300

 Bright Dip

11

Brass, Aluminum

 Iridite, Clear

12 Aluminum Mil-C- 5541E
Mil-DTL- 5541F

 Iridite, Gold #14

13 Aluminum Mil-C- 5541E
Mil-DTL- 5541F

 Alodine 1200

13a Aluminum

 Black Oxide, Brass

14

Brass

Mil-F- 495C

 Black Oxide, Stainless Steel

15 Stainless Steel Mil-C- 13924A, Class 3

 No Finish
 *even if there is no finish- this
 code must be included in part #

16

Brass, Aluminum,
Stainless Steel,
Carbon Steel

 Hot Tin Dip

17a Brass,
Carbon Steel
Mil-T- 10727, Type 2

 Silver Plate

18 Brass,
Carbon Steel
QQ-S- 365,0.0002
- 0.0003

 Electro Tin

19 Brass,
Carbon Steel
Mil-T- 10727, Type1

 Electro Tin 60/40 Solder

19a Brass,
Carbon Steel
M222- Mil-F- 14072

 Zinc Plate .0002 Thick, Clear Chromate

21 Brass,
Carbon Steel
ASTM-B- 633, Type 1

 Zinc Plate .0002 Thick, Yellow/Green Chromate

21a Brass,
Carbon Steel
ASTM-B- 633, Type 2,
(Color Chromate)

 Zinc Plate .0002 Thick, Black Chromate

21b Brass,
Carbon Steel
ASTM-B- 633, Type 2, (Color Chromate)

 Zinc Plate .0002 Thick, Olive Drab

21c Brass,
Carbon Steel
ASTM-B- 633, Type 2,
(Color Chromate)

 Alkali Caustic Etch

26 Aluminum
 
Depth of Threads
Thread
Size
Brass
Tapped
Thru
Brass Tapped
Blind
Aluminum
Tapped
Thru
Aluminum
Tapped
Blind
Stainless
Steel
Tapped
Thru
Stainless Steel
Tapped
Blind
Carbon Steel Tapped Thru Carbon
Steel
Tapped
Blind
M1.6 x 0.35 9mm 4.7mm 9mm 4.7mm 6mm 4.7mm 9mm 4.7mm
M2.5 x 0.45 19mm 4.7mm 19mm 4.7mm 16mm 4.7mm 19mm 4.7mm
M3.0 x 0.5 25mm 6.3mm 25mm 6.3mm 19mm 6.3mm 25mm 6.3mm
M3.5 x 0.6 25mm 9.5mm 25mm 9.5mm 25mm 9.5mm 25mm 9.5mm
M4.0 x 0.7 25mm 11.1mm 25mm 11.1mm 25mm 11.1mm 25mm 11.1mm
M5.0 x 0.8 25mm 12.7mm 25mm 12.7mm 25mm 12.7mm 25mm 12.7mm
Thread depths or sizes which differ from those listed are available on special order.
 
Unthreaded Hole Clearance Chart
INSIDE THREAD M1.6 M2.5 M3 M3.5 M4 M5
INSIDE DIAMETER
(TOLERANCE  + 0.3  / - 0.0)
1.8 2.7 3.2 3.7 4.3 5.3
 
Punch and Anvil (Swaging Tools) Part Numbers
For Threaded Swage Standoffs  -  For Unthreaded Scroll Down
SWAGING TOOLS
For Threaded:
PUNCH ROUND ANVIL HEX ANVIL LENGTH UNICORP
Part
Number
3mm
Diameter
UP1 AN640 AN900 3 - 5.5 MSS100 - MSS105
AN650 AN910 6 - 13 MSS106 - MSS120
4mm
Diameter
UP2 AN660 AN920 3 - 5.5 MSS125 - MSS130
AN670 AN930 6 - 12.5 MSS131 - MSS144
AN680 AN940 13 - 18.5 MSS145 - MSS156
AN690 AN950 19 - 25.5 MSS157 - MSS170
4.5 & 5mm
(same for both)
UP3 AN700 AN960 3 - 5.5 MSS175 - MSS180
MSS225 - MSS230
MSS275 - MSS280
MSS325 - MSS330
AN710 AN970 6 - 12.5 MSS181 - MSS194
MSS231 - MSS244
MSS281 - MSS294
MSS331 - MSS344
AN720 AN980 13 - 18.5 MSS195 - MSS206
MSS245 - MSS256
MSS295 - MSS306
MSS345 - MSS356
AN730 AN990 19 - 25.5 MSS207 - MSS220
MSS257 - MSS270
MSS307 - MSS320
MSS357 - MSS370
6mm
Diameter
UP4 AN740 AN1000 3 - 5.5 MSS375 - MSS380
MSS475 - MSS480
AN750 AN1010 6 - 12.5 MSS381 - MSS394
MSS481 - MSS494
AN760 AN1020 13 - 18.5 MSS395 - MSS406
MSS495 - MSS506
AN770 AN1030 19 - 51 MSS407 - MSS471
MSS507 - MSS571
8mm
Diameter
UP5 AN780 AN1040 3 - 5.5 MSS575 - MSS580
MSS675 - MSS680
AN790 AN1050 6 - 12.5 MSS581 - MSS594
MSS681 - MSS694
AN800 AN1060 13 - 18.5 MSS595 - MSS606
MSS695 - MSS706
AN810 AN1070 19 - 51 MSS607 - MSS671
MSS707 - MSS771
10mm
Diameter
UP5 AN820 AN1080 3 - 5.5 MSS775 - MSS780
MSS875 - MSS880
MSS975 - MSS980
AN830 AN1090 6 - 12.5 MSS781 - MSS794
MSS881 - MSS894
MSS981 - MSS994
AN840 AN1100 13 - 18.5 MSS795 - MSS806
MSS895 - MSS906
 MSS995 - MSS1006
AN850 AN1110 19 - 51 MSS807 - MSS871
MSS907 - MSS971
  MSS1007 - MSS1071
 
Punch and Anvil (Swaging Tools) Part Numbers
For Unthreaded / Clear Hole Swage Spacers
SWAGE TOOLING
For Unthreaded:
PUNCH ROUND ANVIL HEX ANVIL LENGTH

UNICORP
Part
Number

3mm
Diameter
UP1 AN640 AN900 3 - 5.5 MSU100 - MSU105
AN650 AN910 6 - 13 MSU106 - MSU120
4mm
Diameter
UP2 AN660 AN920 3 - 5.5 MSU125 - MSU130
AN670 AN930 6 - 12.5 MSU131 - MSU144
AN680 AN940 13 - 18.5 MSU145 - MSU156
AN690 AN950 19 - 25.5 MSU157 - MSU170
4.5 & 5mm
Diameter
(same for both)
UP3 AN700 AN960 3 - 5.5 MSU175 - MSU180
MSU225 - MSU230
MSU275 - MSU280
MSU325 - MSU330
AN710 AN970 6 - 12.5 MSU181 - MSU194
MSU231 - MSU244
MSU281 - MSU294
MSU331 - MSU344
AN720 AN980 13 - 18.5 MSU195 - MSU206
MSU245 - MSU256
MSU295 - MSU306
MSU345 - MSU356
AN730 AN990 19 - 25.5 MSU207 - MSU220
MSU257 - MSU270
MSU307 - MSU320
MSU357 - MSU370
6mm
Diameter
UP4 AN740 AN1000 3 - 5.5 MSU375 - MSU380
MSU425 - MSU430
AN750 AN1010 6 - 12.5 MSU381 - MSU394
MSU431 - MSU444
AN760 AN1020 13 - 18.5 MSU395 - MSU406
MSU445 - MSU456
AN770 AN1030 19 - 25.5 MSU407 - MSU420
MSU457 - MSU470
8mm
Diameter
UP5 AN780 AN1040 3 - 5.5 MSU475 - MSU480
MSU525 - MSU530
AN790 AN1050 6 - 12.5 MSU481 - MSU494
MSU531 - MSU544
AN800 AN1060 13 - 18.5 MSU495 - MSU506
MSU545 - MSU556
AN810 AN1070 19 - 25.5 MSU507 - MSU520
MSU557 - MSU570
10mm
Diameter
UP5 AN820 AN1080 3 - 5.5 MSU575 - MSU580
MSU625 - MSU630
MSU675 - MSU680
AN830 AN1090 6 - 12.5 MSU581 - MSU594
MSU631 - MSU644
MSU681 - MSU694
AN840 AN1100 13 - 18.5 MSU595 - MSU606
MSU645 - MSU656
MSU695 - MSU706
AN850 AN1110 19 - 25.5 MSU607 - MSU620
MSU657 - MSU670
MSU707 - MSU720
For Modified Parts or Engineering Assistance:
Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803


UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
Copyright©2020, Unicorp Inc., unicorpinc.com or its affiliates