973-674-1700Electronic Hardware, STANDOFFS, Male Female Standoffs, Spacer Standoffs, Male Male Standoffs, Swage Standoffs, Jack Screws, Handles, Captive Panel Screws, Retainers, Thumb Screws, Shoulder Screws, Insulating Washers, Cable Ties.

      Home       Search       Order       Quote       Cross       Catalog       Reps       Technical       Terms       Distributors       About Us        Contact Us

Standoffs
Technical / Engineering Data
Standoffs       Standard e-Catalog  

Material / Shape Selection

 MATERIALS

 Choose & write down your
material / shape code.
Go to next step

SPECIFICATIONS
ROUND SQUARE HEX
  Brass M01 M02 M03 QQ-B- 626, ASTM-B-16
  Aluminum M04 M05 M06 QQ-A- 225 / 3D,  ASTM-B-211,  QQ-A 200 / 9D,  QQ-A 225 / 6A,  QQ-A 225 / 8B
  Stainless Steel, 303 M07 M08 M09  ASTM-A581, ASTM-A582,
 QQ-S- 763, Class 303, Cond. A
  Carbon Steel M10 M11 M12 ASTM-A 108-07
  Phenolic M13 MIL- I- 24768 / 15,  MIL-P-79 T4PEFBE
  Teflon® M14 MIL- P- 14078
ASTM-1710
  Nylon, Natural M17 M18 M19 MIL- P- 17091B, Grade 101
LP-410A, D4066, ASTM-D5989
  Lexan® M20 MIL- P- 81390
  Delrin® M23 M25 LP- 392 A, ASTM-D-4181
  Ultem® M26 GE 1000 Resins
  Stainless Steel, 316 M29 M31 AMS QQ-S-763, ASTM A276
  Titanium, Grade 2 M32 M34 ASTM B348
  Nylon, Black M35 M36 M37 ASTM D4066, ASTM D6779, UL 94V2


    RoHS Compliance Statement  I  R.E.A.C.H. Statement  I  DFARS  I  WEEE
Conflict-Free Minerals Statement  I  Harmonized Tariff Codes
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Properties for Non- Metallic Materials

Properties

 Linen Based
Phenolic		 Teflon® Nylon 10% Glass Filled Lexan®

Delrin®

 Ultem®
 Flammability Rating V-1 UL HB UL 94V-2 V-O UL94HB V-O
 Water Absorption
 (%) 24 hrs.		 0.6 - 0.7 .02 1.5 0.15 0.25 0.25
 Dielectric Constant
 (60 cycles)		 5.2 - 5.3 2.1 10 2.9 3.7 3.15
 Dielectric Strength
 1/8 thickness (v/mil)		 350 400 300- 400 380 500 N/A
 Arc Resistance (sec) 100 200 140 10 129 120
 Tensile Strength (psi) 6,500- 7,000 2,700- 3,100 11,200-16,500 9,000 10,400 16,500
 Heat Resistance
 (continuous degrees F)		 250-275 550 250 270 250 340
 Compression Strength (psi) 201-235 700-1,200 4,000 - 11,000 12,500 18,000 22,000
Plating Selection
Plating Available On These Materials:
Brass,  Aluminum, Stainless Steel & Carbon Steel
AVAILABLE PLATING Choose & write down your
plating code.
Go to next step
 		 PLATING
AVAILABLE ON
THIS MATERIAL		 APPLICABLE
SPECIFICATIONS
 Anodize (Sulphuric) Dichromate Seal, Yellow/ Green F01 Aluminum Mil-A- 8625F, Type 2,
Class 1
 Anodize (Sulphuric) Hot Water Seal, Clear    F02 Aluminum Mil-A- 8625F, Type 2,
Class 1
 Anodize (Chromic) Hot Water Seal, Dark Gray F03 Aluminum Mil-A- 8625F, Type 2,
Class 2
 Anodize- Black F04 Aluminum Mil-A- 8625F- Black, Type 2, Class 2
 Anodize- Black High Lustre F04a Aluminum Mil-A- 8625F- Black-High Lustre, Type 2, Class 2
 Cadmium Plate, Clear Chromate F05 Brass, Carbon Steel QQ-P- 416, Type 1, Class 2
 Cadmium Plate, Commercial F05a Brass, Carbon Steel
 Cadmium Plate, Gold Chromate F06 Brass, Carbon Steel QQ-P- 416, Type 2,
Class 2
 Cadmium Plate, Olive Drab F06a Brass, Carbon Steel QQ-P- 416, Type 2,
Class 3
 Nickel Plate F07 Brass, Carbon Steel QQ-N- 290A, Class 1
Grade G
 Chromium Plate (Bright) F08 Brass, Carbon Steel QQ-C- 320B, Type 1, Class 1
 Chromium Plate, Engineering F08a Brass, Carbon Steel QQ-C- 320B, Type 2 , Class 1
 Chromium Plate Over Nickel Plate F08c Brass, Carbon Steel Mil-QQ-C- 320,
Over-Mil-QQ-N- 290
 Passivate F09 Stainless Steel Mil-F- 14072E (EL)
E 300
 Bright Dip F11 Aluminum, Brass
 Iridite, Clear F12 Aluminum Mil-C- 5541E
Mil-DTL- 5541F
 Iridite, Gold #14 F13 Aluminum Mil-C- 5541E
Mil-DTL- 5541F
 Alodine 1200 F13a Aluminum
 Black Oxide, Brass F14 Brass Mil-F- 495C
 Black Oxide, Stainless Steel F15 Stainless Steel Mil-C- 13924A, Class 3,
Mil-DTL- 13924D,
Class 1 and Y
 No Finish
 *even if there is no finish-
  this code must be included in part #		 F16 Brass, Aluminum,
Stainless Steel
Carbon Steel
All Plastics

 
 Hot Tin Dip F17a Brass,
Carbon Steel		 Mil-T-10727C, Type 2
 Silver Plate F18 Brass, Carbon Steel QQ-S-365-0.0002-0.0003
 Electro Tin F19 Brass, Carbon Steel Mil-T- 10727, Type 1
 Electro Tin 60/40 Solder F19a Brass, Carbon Steel M222-Mil-F- 14072
 Zinc Plate .0002 Thick, Clear Chromate F21 Brass, Carbon Steel ASTM-B- 633, Type 1
 Zinc Plate .0002 Thick, Yellow/Green Chromate F21a Brass, Carbon Steel ASTM-B- 633, Type 2,
(Color Chromate)
 Zinc Plate .0002 Thick, Black Chromate F21b Brass, Carbon Steel ASTM-B- 633, Type 2,
(Color Chromate)
 Zinc Plate .0002 Thick, Olive Drab F21c Brass, Carbon Steel ASTM-B- 633, Type 2,
(Color Chromate)
 Alkali Caustic Etch F26 Aluminum
 TICN (Titanium CarboNitride) F27 Stainless Steel Mil-S- 7720, 303, 18-8

Thread Specifications
Choose & write down your
thread number.
Go to next step
  		 MAJOR THREAD
DIAMETER

TAPPED THRU
Aluminum, Brass, Steel, Nylon,
All Plastics

TAPPED THRU
Stainless Steel, Titanium

 MIN. THREAD
DEPTH (Posts)
BLIND
0- 80 .060 3/8 1/4 3/16
1- 64 .073 3/8 1/4 3/16
1- 72 .073 3/8 1/4 3/16
2- 56 .086 5/8 3/8 3/16
2- 64 .086 5/8 3/8 3/16
3- 48 .099 5/8 3/8 1/4
3- 56 .099 5/8 3/8 1/4
4- 40 .112 1" 1/2 1/4
4- 48 .112 1" 1/2 1/4
5- 40 .125 1" 1/2 1/4
5- 44 .125 1" 1" 1/4
6- 32 .138 1" 1" 3/8
6- 40 .138 1" 1" 3/8
8- 32 .164 1" 1" 7/16
8- 36 .164 1" 1" 7/16
10- 24 .190 1" 1" 1/2
10- 32 .190 1" 1" 1/2
12- 24 .216 1" 1" 1/2
1/4- 20 .250 1" 1" 9/16
1/4- 28 .250 1" 1" 9/16
5/16- 18 .3125 1" 1" 9/16
5/16- 24 .3125 1" 1" 9/16
3/8- 16 .375 1" 1" 9/16
3/8- 24 .375 1" 1" 9/16
3/8- 32 .375 1" 1" 9/16
7/16- 14 .4375 1" 1" 9/16
7/16- 20 .4375 1" 1" 9/16
1/2- 13 .500 1" 1" 9/16
1/2- 20 .500 1" 1" 9/16
 THREADS: Internal- Class UNC 2B
 TOLERANCES:  Length: Up to 4" ±  .005  /  From 4" to  6" ±  .008  / Over  6" ±  .010
 Diameter: Standard commercial bar stock tolerances.
Thread Locking Products Codes
Choose & write down your
OPTIONAL thread locking code. Go to back to
  		  THREAD LOCKING PRODUCTS
PH  ND® PATCH
RP  ND®  360° RING-PATCH
PL  ND® PELL-IT
MS  ND® MICROSPHERES
VT  ND® VIBRA-TITE
ST  ND® STRIP-THREAD

 More Info on ND® Thread Locking Products
For Modified Parts or Engineering Assistance:
 Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729

Phone:  973-674-1700        Toll Free:  1-800-526-1389        Fax:  973-674-3803

UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


291 Cleveland St,  Orange,  New Jersey  07050  USA
Mailing Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
Copyright©2020, Unicorp Inc., unicorpinc.com or its affiliates