DFARS and RoHS



Standoffs, Spacers, Captive, Swage, Male/ Female, Handles, Thumb Screws, Shoulder Screws, Insulating Washers, Male/Male Standoffs, Cable Ties, Plastic Circuit Board Supports, Plastic Handles and Electronic Hardware. Electronic Hardware, Electronic Hardware, Handles, Standoffs and Spacers, Self Clinching Fasteners
Home Search Order Quote Cross Catalog Reps Technical Terms Distributors About Us Contact Us
		RoHS Compliance Statement: In an effort to reduce or eliminate environmental pollution and improve the quality of human health the European Union (EU) has adopted Directive RoHS 2003/11/EC and RoHS Directive 2002/95/EC which will restrict the use of the following hazardous substance for electronic equipment effective July 1, 2006: • Lead • Cadmium • Mercury • Hexavalent Chromium • Polybrominated Biphenyls (PBB) • Polybrominated Diphenyl Ether (PBDE) • Pentabromodiphenyl Ether (PentaBDE) • Octabromodiphenyl Ether (OctaBDE) • Decabromodiphenyl Ether (DecaBDE) Unicorp has been striving to manufacture electronic component hardware that is in RoHS compliance. The following raw materials are currently in RoHS compliance: • Brass • Nylon • Steel • Teflon® • Stainless Steel • Phenolic • Ultem® • Delrin® • Lexan® • Halar ® • Tefzel ® • Polyolefin • Aluminum 2011-T3 • Aluminum (6000 series for all Handles) All of our plating Codes are RoHS compliant except for the following: • F05 Cadmium Plate, Clear Chromate • F05A Cadmium Plate, Commercial • F06 Cadmium Plate, Gold Chromate • F17A Hot Tin Dip • F19A Electro Tin Solder 60/40

Product Overview

Standard e-Catalog
Metric e-Catalog

Self Clinching Fastener e-Catalog

NAS / MS e-Catalog


973-674-1700
1-800-526-1389











		How to Order RoHS Aluminum Parts: When ordering RoHS Aluminum for Standoffs, Spacers, Swage Standoffs, Male-Female Standoffs, Male-Male Standoffs, Captive Screws, Captive Retainers and Thumbscrews add an R before the material Code number. *All Unicorp Aluminum Handles have always been RoHS Compliant, no need to add an R to the part number. Example: P521-R-MO6-F16-632 (RoHS Aluminum-Compliant) Example: P521-MO6-F16-632 (Non-Compliant Aluminum Part Number)








		As of July 1, 2006, all items sold by Unicorp will be in RoHS compliance including our aluminum alloy 2011. Please contact our office at sales@unicorpinc.com if you have any questions on the few finishes that are not currently in compliance. You can rest assured that Unicorp is concerned to transition these issues seamlessly so your order is delivered on time. DFARS Statement: (The Defense Federal Acquisition Regulation Supplement) http://www.acq.osd.mil/dpap/dars/dfars/index.htm A list of Metals below used by Unicorp in our manufacturing of electronic component hardware, as indicated by DFARS Clause 252.225-7009, Preference for Domestic Specialty Metals, Alternative 1, as classified in 225.7003-5 (A)(2). The Metals used by Unicorp are classified as follows: • Stainless Steel: is Compliant Upon Request • Steel (12L14): is exempt of this Requirement • Aluminum: is exempt of this Requirement • Brass: is exempt of this Requirement • Nylon: is exempt of this Requirement • Delrin: is exempt of this Requirement • Teflon: is exempt of this Requirement • Phenolic: is exempt of this Requirement • Lexan: is exempt of this Requirement • Ultem: is exempt of this Requirement • Tefzel: is exempt of this Requirement Please contact our office at sales@unicorpinc.com if you have any questions.

























		WEEE Statement: (Waste Electrical and Electronic Equipment) The European Union has adopted a directive, article 3a, concerning the disposal of Waste Electrical and Electronic Equipment. Unicorp's products are not subject to this directive. Unicorp can not certify the compliance and will not be responsible for any materials or finishes that contain restricted substances that are requested by our customers. Unicorp will not assume liability for the disposal of our products. Any product supplied by Unicorp that may require future disposal will be the responsibility of the purchaser in accordance with local laws and regulations. R.E.A.C.H. Statement: European Union Registration, Evaluation, Authorization and Restriction of Chemicals Unicorp Electronic Hardware and Fasteners is aware of the REACH Regulation (Registration, Evaluation, Authorization, and Restriction of Chemicals Regulation, EC 1907/2006), the European Union regulation that is intended to regulate the use and importation of chemicals and substances into the European Union. Unicorp Electronic Hardware as a manufacturer does not manufacturer or distribute any products that intentionally release any chemicals or substances of concern as detailed in the REACH regulation. Therefore Unicorp Electronic Hardware is not subject to the REACH regulation’s registration requirements: Paragraph 32 and Chapter 2 (3.3).






















	Conflict-Free Minerals Statement: Unicorp is an environmentally and socially responsible supplier that does not use any conflict materials in our production of Unicorp Electronic Hardware. We have never used these materials in the past. Unicorp complies with the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act. The goal of the act is to cut direct and indirect funding of armed groups engaged in conflict and human rights abuses. Unicorp is committed to integrity, human rights and social responsibility. If you have any questions, please do not hesitate to contact our office at sales@unicorpinc.com.









	CA Proposition 65: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Phone: 973-674-1700 Toll Free: 1-800-526-1389 Fax: 973-674-3803

		UNICORP is a leader in manufacturing stock and custom electronic hardware, handles and precision fasteners used by leading companies in nearly every industry since 1971. 291 Cleveland St, Orange, New Jersey 07050 USA Mailing Address: P.O. Box 280, Orange, New Jersey 07051-0280 USA Feedback I Legal Notice I Copyright I Services I Jobs I Contact Us I Email Us I Privacy Statement








Electronic Hardware, STANDOFFS, Male Female Standoffs, Spacer Standoffs, Male Male Standoffs, Swage Standoffs, Jack Screws, Handles, Captive Panel Screws, Retainers, Thumb Screws, Shoulder Screws, Insulating Washers, Cable Ties.