973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware.

    Home      Search      Order      Quote      Cross      Catalog      Reps      Technical      Terms     Distributors      About Us
Dowel Pins
416 Stainless Steel
 Metric  •  Precision  •  Press-Fit  •  Hardened
• Hole is slightly smaller diameter than the dowel
• During assembly the dowel pin must be pressed with force into the hole
A Series
416 Stainless Steel  •  Metric

    • Material-  416 Stainless Steel
    • Rockwell Hardness C 36-42
    • Magnetic
    • Finish-  Passivated per ASTM A380-88
    • Press-Fit
    • Ends-  1 Side: Crown (Spherical Radius)
                 1 Side: Chamfered
    • Chamfered End-  15° +/- 2°
    • Diameter Tolerance-  ?????????
    • Length Tolerance-  + 0.5 mm / - 0.0 mm
    • R Tolerance-  + 0.2 mm / - 0.0 mm
    • W Tolerance-  + 0.2 mm / - 0.0 mm
Part Number Pin Diameter (D) Diameter Tolerance Pin Length (L) R W
MDP416-2MM-5-F09 2.00 mm + .009  /  - .002 5 mm 0.30 mm 0.78 mm
MDP416-2MM-6-F09 2.00 mm + .009  /  - .002 6 mm 0.30 mm 0.78 mm
MDP416-2MM-8-F09 2.00 mm + .009  /  - .002 8 mm 0.30 mm 0.78 mm
MDP416-2MM-10-F09 2.00 mm + .009  /  - .002 10 mm 0.30 mm 0.78 mm
MDP416-2MM-12-F09 2.00 mm + .009  /  - .002 12 mm 0.30 mm 0.78 mm
MDP416-2MM-14-F09 2.00 mm + .009  /  - .002 14 mm 0.30 mm 0.78 mm
MDP416-2MM-16-F09 2.00 mm + .009  /  - .002 16 mm 0.30 mm 0.78 mm
MDP416-2MM-20-F09 2.00 mm + .009  /  - .002 20 mm 0.30 mm 0.78 mm
MDP416-2MM-24-F09 2.00 mm + .009  /  - .002 24 mm 0.30 mm 0.78 mm
 
MDP416-2.5MM-5-F09 2.50 mm + .009  /  - .002 5 mm 0.40 mm 0.95 mm
MDP416-2.5MM-6-F09 2.50 mm + .009  /  - .002 6 mm 0.40 mm 0.95 mm
MDP416-2.5MM-8-F09 2.50 mm + .009  /  - .002 8 mm 0.40 mm 0.95 mm
MDP416-2.5MM-10-F09 2.50 mm + .009  /  - .002 10 mm 0.40 mm 0.95 mm
MDP416-2.5MM-12.5-F09 2.50 mm + .009  /  - .002 12.5 mm 0.40 mm 0.95 mm
MDP416-2.5MM-14-F09 2.50 mm + .009  /  - .002 14 mm 0.40 mm 0.95 mm
MDP416-2.5MM-16-F09 2.50 mm + .009  /  - .002 16 mm 0.40 mm 0.95 mm
MDP416-2.5MM-20-F09 2.50 mm + .009  /  - .002 20 mm 0.40 mm 0.95 mm
MDP416-2.5MM-24-F09 2.50 mm + .009  /  - .002 24 mm 0.40 mm 0.95 mm
 
MDP416-3MM-6-F09 3.00 mm + .0012  /  - .004 6 mm 0.45 mm 1.10 mm
MDP416-3MM-8-F09 3.00 mm + .0012  /  - .004 8 mm 0.45 mm 1.10 mm
MDP416-3MM-10-F09 3.00 mm + .0012  /  - .004 10 mm 0.45 mm 1.10 mm
MDP416-3MM-12-F09 3.00 mm + .0012  /  - .004 12 mm 0.45 mm 1.10 mm
MDP416-3MM-14-F09 3.00 mm + .0012  /  - .004 14 mm 0.45 mm 1.10 mm
MDP416-3MM-16-F09 3.00 mm + .0012  /  - .004 16 mm 0.45 mm 1.10 mm
MDP416-3MM-20-F09 3.00 mm + .0012  /  - .004 20 mm 0.45 mm 1.10 mm
MDP416-3MM-24-F09 3.00 mm + .0012  /  - .004 24 mm 0.45 mm 1.10 mm
 
MDP416-4MM-10-F09 4.00 mm + .0012  /  - .004 10 mm 0.60 mm 1.40 mm
MDP416-4MM-12-F09 4.00 mm + .0012  /  - .004 12 mm 0.60 mm 1.40 mm
MDP416-4MM-14-F09 4.00 mm + .0012  /  - .004 14 mm 0.60 mm 1.40 mm
MDP416-4MM-16-F09 4.00 mm + .0012  /  - .004 16 mm 0.60 mm 1.40 mm
MDP416-4MM-20-F09 4.00 mm + .0012  /  - .004 20 mm 0.60 mm 1.40 mm
MDP416-4MM-24-F09 4.00 mm + .0012  /  - .004 24 mm 0.60 mm 1.40 mm
 
MDP416-5MM-10-F09 5.00 mm + .0012  /  - .004 10 mm 0.75 mm 1.70 mm
MDP416-5MM-12-F09 5.00 mm + .0012  /  - .004 12 mm 0.75 mm 1.70 mm
MDP416-5MM-14-F09 5.00 mm + .0012  /  - .004 14 mm 0.75 mm 1.70 mm
MDP416-5MM-16-F09 5.00 mm + .0012  /  - .004 16 mm 0.75 mm 1.70 mm
MDP416-5MM-20-F09 5.00 mm + .0012  /  - .004 20 mm 0.75 mm 1.70 mm
MDP416-5MM-24-F09 5.00 mm + .0012  /  - .004 24 mm 0.75 mm 1.70 mm
 
MDP416-6MM-12-F09 6.00 mm + .0015  /  - .006 12 mm 0.90 mm 2.10 mm
MDP416-6MM-16-F09 6.00 mm + .0015  /  - .006 16 mm 0.90 mm 2.10 mm
MDP416-6MM-20-F09 6.00 mm + .0015  /  - .006 20 mm 0.90 mm 2.10 mm
MDP416-6MM-24-F09 6.00 mm + .0015  /  - .006 24 mm 0.90 mm 2.10 mm
MDP416-6MM-30-F09 6.00 mm + .0015  /  - .006 30 mm 0.90 mm 2.10 mm
MDP416-6MM-40-F09 6.00 mm + .0015  /  - .006 40 mm 0.90 mm 2.10 mm
 
MDP416-8MM-16-F09 8.00 mm + .0015  /  - .006 16 mm 1.20 mm 2.50 mm
MDP416-8MM-20-F09 8.00 mm + .0015  /  - .006 20 mm 1.20 mm 2.50 mm
MDP416-8MM-24-F09 8.00 mm + .0015  /  - .006 24 mm 1.20 mm 2.50 mm
MDP416-8MM-30-F09 8.00 mm + .0015  /  - .006 30 mm 1.20 mm 2.50 mm
MDP416-8MM-40-F09 8.00 mm + .0015  /  - .006 40 mm 1.20 mm 2.50 mm
 
MDP416-10MM-16-F09 10.00 mm + .0018  /  - .007 16 mm 1.50 mm 3.00 mm
MDP416-10MM-20-F09 10.00 mm + .0018  /  - .007 20 mm 1.50 mm 3.00 mm
MDP416-10MM-24-F09 10.00 mm + .0018  /  - .007 24 mm 1.50 mm 3.00 mm
MDP416-10MM-30-F09 10.00 mm + .0018  /  - .007 30 mm 1.50 mm 3.00 mm
MDP416-10MM-40-F09 10.00 mm + .0018  /  - .007 40 mm 1.50 mm 3.00 mm

Phone:  973-674-1700       Toll Free:  1-800-526-1389       Fax:  973-674-3803

UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971.


UNICORP Physical Address:  291 Cleveland St,  Orange,  New Jersey  07050  USA
Postal Address:  P.O. Box 280,  Orange,  New Jersey  07051-0280  USA

Feedback  I  Legal Notice  I  Copyright  I  Services  I  Jobs  I  Contact Us  I  Email Us  I  Privacy Statement
Copyright©2015, Unicorp Inc.  •  Sunflower In The City Design